Talk to us
Grand Harbour
Valletta sits between two harbours, and a city full of restoration work. We cover the boats along its waterfronts — and wrap the scaffolds, roofs and façades that keep the city’s limestone under repair.
Valletta is a fortified city built almost entirely of Maltese limestone, and a large part of it is under restoration at any one time. Limestone work creates fine dust, and the city’s streets are narrow, steep and lived in. Neighbours, shopkeepers and the authorities all notice when dust escapes from a scaffold — and the winter wind off the harbours finds every loose sheet.
A shrink wrap encapsulation turns the scaffold into a sealed box. The film is welded into one skin and tensioned to the scaffold, so it doesn’t flap, it keeps dust and overspray inside, and it keeps the gregale rain off the stone while it is being repaired or repointed. A temporary roof over an open roof works means the building below stays dry while the roof is off.
Around Valletta
The usual problems
Sheeting is tied on in panels and flaps at every lap. A welded, tensioned envelope gives the wind nothing to catch.
A sealed encapsulation keeps limestone dust, grinding and overspray inside the scaffold. Fire-retardant film is available for sites that need it.
A shrink wrap temporary roof over a scaffold frame keeps the building dry while the roof is replaced — and it stays put through winter weather.
The approach
Valletta jobs are about access and permission as much as film. Narrow streets limit what can be delivered and when, and many buildings are protected. We work with the main contractor and the scaffolder, fit the wrap from the scaffold itself, and keep deliveries small enough for the streets they’re going down.
On the waterfronts the work is marine — boats berthed or moored along both harbours. Those follow the same approach as the rest of our boat covers: framed, vented, welded shut and taken away at the end.
Before we quote
In Valletta we survey from the scaffold with your scaffolder, and plan deliveries for the street. We measure the vessel, work out the frame, the film area, the vents and the doors — and the number you get back is the number you pay. No provisional sums, no “subject to access”.
Illustrative of a typical townhouse façade. Your own survey happens in Valletta — or starts from photos, if you’d rather.
Start from your phone
Not every Valletta job needs a visit to get going. Send a couple of photos and tell us the street, the scaffold drawing if you have one, and the programme dates, and an installer will tell you what’s involved — including when shrink wrap isn’t the right call.
Whole item in frame, plus one close-up of the access side.
WhatsApp or email, with the street, the scaffold drawing if you have one, and the programme dates.
Approach, timescale and a price, in plain English.
Finished covers
Tight, smooth, framed clear of the boat and welded into one skin. This is the standard every Valletta cover is fitted to.
Questions from Valletta
Yes. We encapsulate scaffolds and build temporary roofs for restoration and refurbishment work, fitting the wrap to the scaffold your scaffolder has already put up.
The wrap sits on the scaffold, not on the building, so it doesn’t touch the stonework. Any permits for the scaffold itself are for your contractor; we work to whatever conditions apply to the site.
Yes — boats along both harbours. If your boat is in Marsamxett, see our Msida and Ta’ Xbiex pages; in Grand Harbour, see Birgu and Kalkara.
Much better. Netting stops debris but lets dust straight through. A welded film envelope keeps dust and overspray inside the scaffold.
Send a photo, the length and where she is. You’ll get a straight answer on the approach, and a fixed price after the survey.
Quick quote
Tell us what
needs covering.
